Energy audit & retrofit
HVAC energy audit and retrofit
HVAC is often the largest energy user in a commercial building. An energy audit shows where that energy goes and which changes are worth making, from controls and maintenance to equipment replacement.
- Measured, not guessed
- Prioritised recommendations
- Retrofit delivery available

What the audit covers
Where HVAC energy is usually lost
Schedules and controls
Systems running when spaces are empty, poor set points or controls fighting each other.
Oversized or ageing equipment
Units cycling inefficiently or running far below their best operating range.
Air distribution
Leaky or poorly insulated ducts, blocked grilles and unbalanced airflow.
Dirty coils and filters
Higher fan and compressor energy from fouled heat-transfer surfaces.
Building envelope
Solar gain through glazing and infiltration at doors that inflate the load.
Plant operation
Chiller, pump and cooling tower sequencing on central systems.
Our approach
From measurement to retrofit
- 01
Collect data
Equipment list, energy bills, operating hours and occupant feedback.
- 02
Measure on site
Spot readings or short-term logging of power, temperatures and airflow where useful.
- 03
Analyse and prioritise
Measures ranked by cost, saving, disruption and risk.
- 04
Implement and verify
Carry out agreed retrofits and compare performance before and after.
Typical measures
Retrofit options we implement
Controls and scheduling
Time schedules, set-point limits, occupancy-based control and simple BMS improvements.
Equipment replacement
Replacing old fixed-speed units with right-sized inverter or VRF systems.
Learn more
Fan and pump drives
Variable-speed drives on AHU fans and pumps where loads vary.
Duct sealing and insulation
Reducing leakage and heat gain in air distribution.
Maintenance reset
Deep cleaning and recalibration that restore lost capacity.
Learn more
Load reduction
Advice on shading, film and door control that cut the cooling load.
FAQs
Energy audit questions
Still have a question? Contact us or call +91 94448 77783.
How much energy can an HVAC retrofit save?
It depends entirely on the starting point. Savings are estimated per measure after the audit, and we prefer to verify them by measuring before and after rather than quoting a headline figure.
Is an audit worthwhile for a small building?
A short walk-through audit is often enough for smaller buildings and costs little compared with the potential savings from schedules and maintenance alone.
Can retrofits be done without shutting down?
Most can be phased by zone or done outside working hours.
Related
Related services and guides
True HVAC · Chennai
Ready to discuss your requirement?
Share the site, spaces, operating hours and any drawings. We will review the requirement and suggest the right next step.
