Skip to content

Enquiry checklist

HVAC project enquiry checklist

You do not need a finished specification to start. These details help us understand the building and the requirement, so the first conversation is useful and any quotation is based on facts rather than assumptions.

HVAC project planning with drawings and equipment schedules
01ContextBuilding type, location, use and project stage.
02RequirementLoads, hours, rooms, air needs and current problem.
03ConstraintsAccess, programme, interfaces and decision process.

Scope and priorities

Six information groups that improve the first review

Approximate information is acceptable at enquiry stage. Mark anything you are unsure of so it can be checked on site.

01

Building and application

State the site, facility type, approximate area, floors, room uses and whether the work is new, replacement or service.

02

Occupancy and operating hours

Describe typical and peak people, shifts, after-hours zones, critical operation and seasonal or event changes.

03

Cooling and air requirements

Explain comfort issues, process heat, outdoor air, exhaust, humidity, pressure or air-quality concerns.

04

Existing system and evidence

List equipment where known, zones served, faults, alarms, observations, maintenance history, drawings and photographs.

05

Site and coordination constraints

Identify plant or ceiling access, power, drainage, structure, routes, occupied work, shutdowns and other trades.

06

Project and commercial route

State the decision stage, required deliverables, programme, review contacts and responsibilities needing definition.

Decision framework

Keep the enquiry useful without over-specifying the answer

A project brief should define needs and constraints while leaving room for evidence-based system selection.

  1. 01

    Separate needs from preferences

    State the required outcome and record any preferred equipment or approach as a preference to be checked.

  2. 02

    Make assumptions visible

    Identify estimated areas, loads, schedules or retained equipment so they can be confirmed during review.

  3. 03

    Define responsibility boundaries

    Ask who will design, supply, install, connect, test, document and maintain each part of the work.

  4. 04

    Request comparable responses

    Use the same information and response format when comparing proposals, including exclusions and information gaps.

Project path

A practical enquiry-to-scope sequence

The next step may be a service visit, survey, design discussion or proposal depending on the evidence available.

  1. 01

    Assemble the available facts

    Collect plans, room data, equipment information, photographs, service history and operating observations.

  2. 02

    Describe the objective

    Explain what is changing or failing, which spaces are affected and what operational result is required.

  3. 03

    Review information gaps

    Identify site measurements, load data, access checks, stakeholder decisions or specialist criteria still needed.

  4. 04

    Agree the next deliverable

    Confirm whether the next step is assessment, design basis, options review, quotation, maintenance scope or repair plan.

Prepare the enquiry

Minimum fields for the first message

This compact set is enough to route most enquiries to the appropriate service or application discussion.

  • SiteLocation, building or facility type and the area or rooms involved.
  • UseOccupancy, operating hours, equipment or process loads and critical spaces.
  • NeedNew system, replacement, ventilation, maintenance, repair, upgrade or project coordination.
  • Current conditionExisting equipment, symptoms, measured information, recent changes and available records.
  • ConstraintsAccess, shutdowns, occupied work, programme, power, drainage and route limitations.
  • Contact and stageDecision contacts, concept or tender stage, desired next step and available review dates.

Request a quote

FAQs

Questions about preparing an HVAC enquiry

Still have a question? Contact us or call +91 94448 77783.

Do I need a completed HVAC design before making contact?

No. A building and operating brief can be enough to identify the information, survey or design work needed next.

What should I send for an existing fault?

Share equipment details where available, affected zones, symptoms, timing, alarms, recent work, photographs and service history.

Can a quotation be prepared from floor area alone?

Floor area may support an early discussion, but capacity and scope also depend on use, occupancy, envelope, equipment, outdoor air, schedules and site conditions.

How can I compare proposals more fairly?

Issue the same requirements and ask each bidder to state assumptions, selections, responsibilities, exclusions, tests, documents and lifecycle access.

Where should I send the enquiry?

Use the request-a-quote form, or call or e-mail us using the details on the contact page.

True HVAC · Chennai

Ready to discuss your requirement?

Share the site, spaces, operating hours and any drawings. We will review the requirement and suggest the right next step.